**This is the newest version with 20% more battery life

Mighty Portable Vaporizer by Storz & Bickel

The Mighty is one of the most powerful portables with vapor thickness and flavor on par with desktop vapes.

The Mighty is a powerful hybrid portable known for desktop vaporizer level vapor quality.

We carry the newest version of the Mighty with updated vibration notifications and Boost mode for a quick temperature kick.

mighty vs crafty

Key Features

Newest Version – Boost Mode / Updated Vibration
Includes Improved Battery with 20% more Life
Powerful, Thick Vapor Production
Convection Dominant Heating
Temperature Range: 104-410F
8 Diffused Heat Jets
Minimal Draw Restriction
Ultra Precise Heater
Dual Li-ion Batteries
60 Second Heatup Time
90 Minute Run Time
Passthrough Charging
Draw Sensitive Sleep Timer
Unique Cooling Unit
Vibration Notifications
Dimensions: 3.2″ x 1.2″ x 5.5″
Weight: 0.5 lb
2 Year Limited Warranty

Mighty vapor production

Vapor Production

Eight convection heat jets in the Mighty’s conductive loading chamber have nearly no draw restriction and provide a diffused flow for optimal extraction without stirring.

Temperature control ranging from 104-410F down to the digit and the unique cooling unit top section keeps vapor smooth even at the highest temperature settings.

The Mighty Cooling Unit

The Very Cool, Cooling Unit

A Cooling unit unlike any other. The top piece of the Mighty has a unique airpath that gives a lot of distance in a small space without affecting the airflow.

Giving your airflow a chance to cool down is a big reason the Mighty’s vapor production is so smooth. Doing this in such a small space without affecting airflow is one of the reasons the Mighty has been so popular.

Battery Powered

Two internal lithium ion batteries bring the ultra precise heater up to vaping temperature in a minute flat and provide an hour and a half of vaping time per charge.

How to Use your Mighty

Load the chamber – Twist the cooling unit counterclockwise and lift to access the heating chamber. A full load of coarsely ground and lightly packed material works best in our experience

Turn it on – Activate the Mighty by holding down the side button for a couple seconds until the unit vibrates

Set your temperature – Use the front + and – buttons

Take a draw – When the set temperature is reached the unit will vibrate a second time. Then you are good to go

Boost Mode – For a quick temperature jump. Press the power button twice in a row while the mighty is fully heated. This will help you get that last bit of extraction from your material.

The Mighty features a draw sensitive timer that puts the unit to sleep after 2+ minutes of not being used, vibrations let you know when the unit has reached temp or gone to sleep.

mighty cleaning

Cleaning the Mighty

Cleaning your Mighty on a regular basis will keep it functioning like new.

Brushing the chamber – After every session, use the cleaning brush to keep debris off the screens in the chamber and cooling unit. This will keep the airflow open.

Basic Cleaning – Remove the cooling unit and separate the pieces. Use cotton swabs and a small amount of isopropyl alcohol to clean these parts, as well as the chamber.

Deeper cleaning – same as the basic cleaning, however you will also remove the Seal-Rings and Screens. These parts can be cleaned with alcohol or be replaced with the Seal-Ring and the Screen Sets. If you follow the steps of brushing and basic cleaning, the need to replace these parts will be uncommon.