Fury 2 Portable Vaporizer by Healthy Rips

The Fury 2 is the perfect everyday carry; an impossibly small hybrid heating vape with a tough and sleek metal unibody.

The Healthy Rips Fury 2 is among the most compact and pocket friendly vapes in existence at a palm concealable 2″ x 1″ x 3″. The Fury 2 weighs in at less than 5 ounces thanks to its ultra durable unibody built from nearly indestructible yet lightweight Kirksite alloy. The Fury 2’s heating element is below the stainless steel loading chamber to extract your material through an efficient mix of convection and conduction. The optional Fury 2 borosilicate glass water pipe adapter increases convection and pairs with any 10, 14 or 18mm female connections. The Fury 2 offers a temperature range of 320°- 430°F and reaches 350° in 20 seconds flat with a run time of around 40 minutes per charge. The Fury 2 is powered by a 1600mAh 18500 LiPo battery and charges using standard Micro-USB for maximum convenience. Temperature is controlled through a simple 3 button interface paired with a clear OLED display that also provides battery and sleep timer info.

Key Features

Discreet Palm Sized Form
Metal Unibody Build
Convection Dominant Hybrid
20 Second Heatup Time
Approx. 40 Minute Run Time
Stainless Steel Heating Chamber
10mm/14mm/18mm Water Pipe Adapter (Optional)
Optional WPA Increases Convection
Temp Range: 320°- 430°F
Clear OLED Display
1600 mAh LiPo Battery
90 Min Charge Time
Protective Top Cover
Dimensions: 2″ x 1″ x 3″
Weight: 4.8 Ounces

Using the Fury 2

The Fury 2 turns on and off with 3 clicks of the top button. Temperature is adjusted using the two smaller buttons; once your set temperature is reached the side LEDs change from red to green. The mouthpiece is removed by pressing outward, revealing the heating chamber below. A fine grind and full, loose filling works best in our experience. To use the water pipe adapter first heat the unit up, load your ground material directly into the oven at the end of the adapter and then insert it into the heated vape. After four minutes of usage the unit will sleep; reactivate it by pressing the power button 3 times. The side LEDs can be turned off and on by holding down the power button for a few seconds. Before your first use it’s recommended to let the unit charge for two hours and run two heat cycles at 430F.

Included Items